es07b, es07d www.vishay.com vishay semiconductors rev. 2.0, 02-may-12 1 document number: 85737 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 ultrafast rectifier surface mount mechanical data case: do-219ab (smf) polarity: band denotes cathode end weight: approx. 15 mg packaging codes/options: gs18/10k per 13" reel (8 mm tape) gs08/3k per 7" reel (8 mm tape) int. construction: single features ? for surface mounted applications ? low profile package ? ideal for automated placement ? glass passivated ? high temperature soldering: 260 c/10 s at terminals ? wave and reflow solderable ? aec-q101 qualified ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 note (1) mounted on epoxy glass pcb with 3 mm x 3 mm cu pads ( ? 40 m thick) note (1) mounted on epoxy glass pcb with 3 mm x 3 mm cu pads ( ? 40 m thick) 17249 parts table part ordering code marking remarks es07b es07b-gs18 or ES07B-GS08 eb tape and reel es07d es07d-gs18 or es07d-gs08 ed tape and reel absolute maximum ratings (t amb = 25 c, unless otherwise specified) parameter test condition part symbol value unit maximum repetitive pe ak reverse voltage es07b v rrm 100 v es07d v rrm 200 v maximum rms voltage es07b v rms 70 v es07d v rms 140 v maximum dc blocking voltage es07b v dc 100 v es07d v dc 200 v maximum average forward rectified current t tp = 109 c i f(av) 1.2 a t a = 65 c (1) i f(av) 0.5 a peak forward surge current 8.3 ms single half sine-wave t l = 25 c i fsm 30 a thermal characteristics (t amb = 25 c, unless otherwise specified) parameter test condition symbol value unit thermal resistance junction to ambient air (1) r thja 180 k/w operating junction and storage temperature range t j , t stg - 55 to 150 c
es07b, es07d www.vishay.com vishay semiconductors rev. 2.0, 02-may-12 2 document number: 85737 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note (1) pulse test: 300 s pulse width, 1 % duty cycle typical characteristics (t amb = 25 c, unless otherwise specified) fig. 1 - typical forward characteristics fig. 2 - forward current derating curve fig. 3 - typical diode capacitance vs. reverse voltage fig. 4 - typical reverse characteristics electrical characteristics (t amb = 25 c, unless otherwise specified) parameter test condition part symbol min. typ. max. unit instaneous forward voltage i f = 1 a (1) es07b v f 0.98 v es07d v f 0.98 v maximum dc reverse current at rated dc blocking voltage t a = 25 c es07b i r 10 a es07d i r 10 a t a = 100 c es07b i r 50 a es07d i r 50 a reverse recovery time i f = 0.5 a, i r = 1 a, i rr = 0.25 a es07b t rr 25 ns es07d t rr 25 ns typical capacitance 4 v, 1 mhz es07b c j 4pf es07d c j 4pf 0.001 1 0.1 0.01 10 0 0.4 0.2 0.6 0.8 1.0 1.2 1.4 18242 i f (a) v f ( v ) typical at 150 c typical at 100 c typical at 25 c 0 1.2 1.0 0.8 0.4 0.6 0.2 1.4 050 25 75 100 125 150 18243 a v erage for w ard c u rrent (a) temperat u re (ambient or tie) (c) ambient temperat u re tie point temperat u re 0 6 5 4 2 3 1 7 0.1 1 10 100 18244 c d (pf) v r ( v ) f = 1 mhz 0 40 80 120 160 200 v r ( v ) i r (a) 1000 100 10 1 0.1 0.01 18245 t j = - 50 c t j = 150 c t j = 25 c t j = 50 c t j = 75 c t j = 100 c t j = 125 c t j = 0 c
es07b, es07d www.vishay.com vishay semiconductors rev. 2.0, 02-may-12 3 document number: 85737 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 package dimensions in millimeters (inches): do-219ab (smf) foot print re commendation: re v . 3 - date: 13. march 2007 doc u ment no.:s8- v -3915.01-001 (4) 1.3 (0.051) 1.3 (0.051) 2.9 (0.114) 1.4 (0.055) 2.9 (0.114) 2.7 (0.106) 3.9 (0.154) 3.5 (0.138) 0.85 (0.033) 0.35 (0.014) 1.2 (0.047) 0.8 (0.031) 1.9 (0.075) 1.7 (0.067) 1.08 (0.043) 0.88 (0.035) 0.25 (0.010) 0.05 (0.002) 0.1 (0.004) 0 (0.000) 5 5 created - date: 15. febr u ary 2005 17247 detail z enlarged
es07b, es07d www.vishay.com vishay semiconductors rev. 2.0, 02-may-12 4 document number: 85737 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 blistertape dimensions in millimeters: do-219 ab (smf) 18513 ps doc u ment-no.: s8- v -3717.02-001 (3)
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
